Miele Boost CX1 Operating instructions/Installation instructions - Page 22
Frequently Asked Questions
View all Miele Boost CX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
en-US Frequently Asked Questions With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. Time and money will be saved because a service call will not be needed. This guide may help you to find the reason for the fault, and how to correct it. Risk of electric shock from voltage. The supply voltage is applied to the appliance even if it is switched off. Before dealing with any problems, unplug the appliance from the electrical socket. Problem The vacuum cleaner turns off automatically. The cleaning performance is poor. Cleaning performance is reduced. Possible cause and solution A temperature limiter switches the vacuum cleaner off automatically if it gets too hot. This can occur when the airways are blocked by bulky objects. Switch the vacuum cleaner off immediately using the On/Off foot switch . Unplug the vacuum cleaner from the electrical socket. After removing the cause of the fault, wait for approximately 20-30 minutes to allow the vacuum cleaner to cool down. It can then be turned on again. The dust container is full. Empty and clean the dust container (see "Mainte- nance" - "Emptying and cleaning the dust container"). The fine dust filter is dirty. Clean the fine dust filter and the filter mat (see "Maintenance" - "Cleaning the fine dust filter"). The filter frame/pre-filter is soiled. Clean the filter frame/pre-filter (see "Maintenance" - "Cleaning the filter frame/pre-filter"). 22