Miele Boost CX1 Operating instructions/Installation instructions - Page 41
the CX FSF fine dust filter with a new
View all Miele Boost CX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
en-CA Clean the pleated side of the fine dust filter with the long brushes on the cleaning tool (Fig. 32). Risk of damage caused by incorrect cleaning. The fine dust filter and the filter mat can become damaged. Both filters can lose their effect. Do not use pointed or sharp-edged objects to clean the fine dust filter and the filter mat. Clean the pleated side of the fine dust filter and the filter mat with water once a month. Rinse the pleated side of the fine dust filter under cold running water (Fig. 33). Clean the filter mat under cold running water (Fig. 34). Risk of damage caused by incorrect cleaning. The fine dust filter and the filter mat can become damaged. Both filters can lose their effect. Do not use dish detergent or cleaning brushes when cleaning the pleated side of the fine dust filter with water. After cleaning, allow the fine dust filter to dry in a well ventilated room for a minimum of 24 hours with the pleated side facing up. Choose a well ventilated room. After cleaning, also allow the filter mat to dry for a minimum of 24 hours. Putting the fine dust filter and the filter mat together Attach the dry filter mat to the dry fine dust filter so that the soft side of the filter mat is pointing up and the loop used to remove it is visible (Fig. 35). Fit the fine dust filter carefully in the dust container (Fig. 36). Press the fine dust filter firmly into position. In order to continue to achieve the best possible cleaning results replace the CX FSF fine dust filter with a new one after approx. 3 years. Reinsert the dust container in the vacuum cleaner (Fig. 28). Cleaning the filter frame and prefilter (Figs. 37-41) There is a removable filter frame on the rear side of the dust container side flap. Behind the side flap is a pre-filter. Clean both parts whenever necessary. Remove the dust container (Fig. 26). Lift up the dust container handle and hold it in this position (Fig. 37). Press the release catch on the side flap. There is a cut-out on the opposite side to make it easier to remove the side flap. Remove the side flap. Once the side flap has been removed, the pre-filter inside can be accessed. Clean the pre-filter and the side walls on the inside using the cleaning tool (Fig. 38). 41