Miele W3048 Product Manual - Page 38
Cleaning the water inlet filter, connections are not tightened.
View all Miele W3048 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Cleaning and care Cleaning the water inlet filter The washing machine has two filters to protect the water inlet valve. These filters should be checked every six months or so, or more often if there are frequent interruptions to the water supply. First turn off the faucet. Unscrew the inlet hose from the faucet in a clockwise direction using a screwdriver (if necessary). Remove the rubber seal 1 from the connector. Using needle nose pliers, take hold of the plastic filter bar 2 and remove it. Rinse the filter under running water carefully remove all coarse particles. Put the filter and seal back into place. Leaking can occur if the screw connections are not tightened. After cleaning, turn on the water supply and make sure the screw connections are watertight. If water leaks, tighten the screw connections. Dirt particles in the water can damage the washing machine. The filters must be put back in place after cleaning. 34