Miele W3048 Product Manual - Page 40
The following fault message appears in the display and the program has been canceled
View all Miele W3048 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Frequently asked questions The following fault message appears in the display and the program has been canceled Problem Fault Drain Check drain Fault Water inlet Open water faucet Waterproof system activated Technical fault Call Technical Service Possible cause and solution The drain is blocked. The drain hose is too high. Clean the drain filter and the drain pump. The maximum drain pump height is 3 ft (1m). The water inlet is blocked or restricted. Check whether the water supply is turned on properly. Check whether the inlet hose is kinked. The filter in the water inlet is blocked. Clean the filter. The waterproof system has activated. Turn off the water supply. Call Technical Service There is a fault. Restart the program. If the fault message appears again contact Technical Service. To turn the fault message off: Open the drum door or press the Cancel button until the fault message goes out. 36