Miele W3048 Product Manual - Page 53

Leveling the machine, Screwing out and adjusting the feet, securely with a pipe

Get Miele W3048 PDF manuals and user guides View all Miele W3048 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Installation Leveling the machine The washing machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electric and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used to level the machine. All four feet are screwed in when the machine is delivered.  Use a level to check that the washing machine is standing level.  Hold foot 1 securely with a pipe wrench. Turn counter nut 2 again using the wrench supplied until it sits firmly up against the housing.  There is a danger of the washing machine moving about. All four counter nuts must be firmly up against the housing. Please also check this for the feet which did not need adjustment.  Using the wrench supplied, turn counter nut 2 in a clockwise direction. Then turn counter nut 2 together with foot 1 to unscrew. 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
Installation
49
Leveling the machine
The washing machine must stand
perfectly level on all four feet to ensure
safe and proper operation.
Incorrect installation may increase
electric and water consumption and
may cause the machine to move about.
Screwing out and adjusting the
feet
The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is
delivered.
Using the wrench supplied, turn
counter nut
2
in a clockwise direction.
Then turn counter nut
2
together with
foot
1
to unscrew.
Use a level to check that the washing
machine is standing level.
Hold foot
1
securely with a pipe
wrench. Turn counter nut
2
again
using the wrench supplied until it sits
firmly up against the housing.
There is a danger of the washing
machine moving about.
All four counter nuts must be firmly
up against the housing. Please also
check this for the feet which did not
need adjustment.