Miele W3048 Product Manual - Page 41

Frequently asked questions A message appears in the display at the end of the program Message In the display flashes Anti-crease alternating with Check detergent. Possible cause and solution The machine has oversudsed.  Use less detergent in the next wash program, and follow the recommended amount on the detergent packaging. General problems with the washer Problem The washer shakes during the spin cycle. There are unusual sounds coming from the drain pump. Large residues of detergent remain in the dispenser drawer. The fabric softener is not completely dispensed or too much water remains in the  compartment. The display shows a foreign language. Possible cause and solution The four feet are not resting evenly on the floor.  Level the machine (see "Leveling the washer"). There is no fault! Lapping sounds at the beginning and end of the drain process are normal. The water pressure is too low.  Clean the water intake hose filter under running water and carefully remove any large particles. Water softeners tend to clump.  Clean the detergent drawer. In the future add the detergent first then the water softener. The siphon tube is either positioned incorrectly or clogged.  Clean the siphon tube, see "Cleaning and care - Cleaning the detergent drawer". The display language was adjusted.  Select the display language. See "Setting the display language". 37