NEC LT170 LT170 user's manual - Page 28

USING ON-SCREEN MENU 3. Rotate the SELECT +/- dial clockwise. Keep rotating the SELECT +/- dial until the highlight reaches [Noise Reduction]. When the highlight reaches [Flicker Reduction], [Setup 1] menu will be displayed. 2. Press the ENTER button. The selected item will be displayed. Keep rotating the SELECT +/- dial clockwise and the menu items will sequence as follows: [Image] → [Setup 1] → [Setup 2] → [Information] → [Default] → [Image] → ... Keep rotating the SELECT +/- dial counterclockwise and the menu items will sequence as follows: [Default] → [Information] → [Setup 2] → [Setup 1] → [Image] → [Default] → ... Adjusting and Setting Items For Adjusting items 3. Rotate the SELECT +/- dial to highlight the item you want to set. 4. Press the ENTER button. This will return to the previous menu. NOTE: The ENTER/SOURCE button on the cabinet works as: * Execute menu selection. * Adjust the slide bar. * Display the submenu 1. Rotate the SELECT +/- dial to highlight the menu item you want to adjust. 2. Press the ENTER button. 3. Rotate the SELECT +/- dial to adjust the item. 4. Press the ENTER button. Changes will take effect. For Selecting items 1. Rotate the SELECT +/- dial to highlight the menu item you want to set. E-28