NEC LT30 LT30/LT35 UM - Page 17
Installation and Connections, (1) Setting Up the Screen and the Projector, Selecting a Location
UPC - 050927250361
View all NEC LT30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
2. Installation and Connections This section describes how to set up your projector and how to connect video and audio sources. Your projector is simple to set up and use. But before you get started, you must first: ᕡ Set up a screen and the projector. ᕢ Connect your computer or video equipment to the projector. See pages 12 to 15. ᕣ Connect the supplied power cable. See page 16. To the wall outlet. NOTE: Ensure that the power cable and any other cables are disconnected before moving the projector. When moving the projector or when it is not in use, cover the lens with the lens cap. ᕡ Setting Up the Screen and the Projector Selecting a Location The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 30" (0.76 m) measured diagonally when the projector is roughly 47 inches (1.2 m) from the wall or screen. The largest the image can be is 300" (7.6 m) when the projector is about 480 inches (12.2 m) from the wall or screen. Use the chart below as a rough guide. Screen Size (Unit: cm/inch) 609.6(W)ן457.2(H) / 240(W)ן180(H) 300" Screen Size (diagonal: inch) 487.7(W)ן365.8(H) / 192(W)ן144(H) 240" 406.4(W)ן304.8(H) / 160(W)ן120(H) 365.8(W)ן274.3(H) / 144(W)ן108(H) 200" 180" 304.8(W)ן228.6(H) / 120(W)ן90(H) 150" 243.8(W)ן182.9(H) / 96(W)ן72(H) 203.2(W)ן152.4(H) / 80(W)ן60(H) 120" 162.6(W)ן121.9(H) / 64(W)ן48(H) 100" 121.9(W)ן91.4(H) / 48(W)ן36(H) 80" 81.3(W)ן61.0(H) / 32(W)ן24(H) 60" 61.0(W)ן45.7(H) / 24(W)ן18(H) Lens center 304"0" 1.2/471.2.6/63.0 2.4/94.53.2/126.04.0/157.54.9/192.9 6.1/240.2 7.3/287.4 8.1/318.9 Distance (Unit: 9.8/385.8 m/inch) 12.2/480.3 NOTE: • The distances are indicated by intermediate values between tele and wide. Use as a rule of thumb. • The Zoom lever adjusts the image size up to +/-10% • For more details on throw distance, see next page. • Changing the image size starts the Auto Focus to adjust the focus; changing the throw angle starts the Auto Keystone to correct the vertical keystone distortion. 9