NEC LT30 LT30/LT35 UM - Page 26
Note on Startup screen (Menu Language Select screen), Use the SELECT, button to select one of - replacement lamp
UPC - 050927250361
View all NEC LT30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
3. Projecting an Image (Basic Operation) Note on Startup screen (Menu Language Select screen) When you first turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one of the nine menu languages. To select a menu language, follow these steps: 1. Use the SELECT ̆ or ̄ button to select one of the nine languages from the menu. FOCUS SELECT OFF ON POWER FOCUS PIC-MUTE PAGE UP MENU DOWN ENTER EXIT 2. Press the ENTER button to execute the selection. After this has been done, you can proceed to the menu opera- SELECT tion. If you want, you can select the menu language later. (→ [Lan- FOCUS guage] on page 40) OFF ON POWER FOCUS PIC-MUTE PAGE UP MENU DOWN ENTER EXIT NOTE: Immediately after turning on the projector, screen flicker may occur. This is normal. Wait 3 to 5 minutes until the lamp lighting is stabilized. When the [Lamp mode] is set to [Eco], the LAMP indicator will light green. If one of the following things happens, the projector will not turn on. • If the internal temperature of the projector is too high, the projector detects abnormal high temperature. In this condition the projector will not turn on to protect the internal system. If this happens, wait for the projector's internal components to cool down. • When the lamp reaches its end of usable life, the projector will not turn on. If this happens, replace the lamp. • If the lamp fails to light, and if the STATUS indicator flashes on and off in a cycle of six times, wait a full minute and then turn on the power. 18