NEC LT80 User Manual - Page 12
Terminal Panel Features - multisync
View all NEC LT80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Terminal Panel Features This panel is located in the side and is where you connect your cables. 1 Video Input Connect a VCR, laser disk player, or document camera here to project video. Left Channel/Mono Audio Input Jack This is your left channel audio input for stereo sound coming from video equipment or audio system. This also serves as your monaural audio input. Right Channel Audio Input Jack This is your right channel audio input for stereo sound. S-Video Input Here is where you connect S-Video input from an external source like a VCR. 2 PC Control Port Use this port to connect your PC to control the MultiSync LT80 Projector. This enables you to use your PC and serial communication protcol to control the projector. If you are writing your own program, command reference are on pages 83 to 86. 3 RGB Input Connector (Mini D-Sub 15 pin) Connect your PC or other RGB equipment such as IBM or compatible computers. Use the signal cable that's supplied to connect to a PC. RGB Audio Input Mini Jack This is where you connect RGB audio output from a computer or another RGB source. NOTE: S-Video provides more vivid color and higher resolution than the traditional composite video format. 21 1 2 VIDEO INPUT PC CONTROL S-VIDEO VIDEO L(MONO) - R-AUDIO RGB INPUT RGB OUPUT RGB AUDIO RGB AUDIO 3 INTRODUCTION 22