NEC LT80 User Manual - Page 28
Menu Descriptions & Functions
View all NEC LT80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
53 Menu Descriptions & Functions Source Menu Enables you to select a video source such as a VCR, DVD player, laser disk player, computer or document camera depending on what is connected to your inputs. Press the "Select" button on the projector cabinet or (v) (w) buttons on your remote control to highlight the menu for the item you want to adjust Video Selects device connected to your video input (VCR, document camera, laser disk player or DVD player). S-Video Selects device connected to S-Video input (Laser disk player, S-VHS VCR or DVD player). RGB Selects computer connected to your RGB input. Use the "Adjust" (+) or (-) buttons to select a standard* or one of six** custom settings you can create and store. Press the "Enter" button on the cabinet or the "Left Click" button on the remote control to save your selection. NOTE: If a previously saved custom memory location is used with a new or different input signal it may not sync up, producing a distorted image, or no image at all. If so, follow the instructions below: 1) Disconnect the signal cable so that there is no input signal. In this condition the on-screen message will be displayed. 2) Select RGB standard from the source menu. 3) Connect the signal cable again. NOTE: * Standard is normally used and it can be user changed and automatically recalled. ** "Custom 6" is read only. This feature is useful when an SVGA image (800ן600) is displayed with a notebook computer supported by XGA (1024ן768). OPERATION 54