NEC PX-61XM2A 42VP4/42XM2/50XM3/61XM2 - Page 35
ORBITER settings, INVERSE Settings, ORBITER Function settings - user manual
View all NEC PX-61XM2A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
LOCK1, 2, 3 .... Sets maximum brightness. The brightness level decreases in the order of LOCK 1, 2, 3. LOCK 3 provides minimum brightness. ORBITER Use this to set the picture shift. Example: Setting "ORBITER" to "AUTO1" • H-DOT →1 DOT ↔ 2 DOT 19 DOT ↔ 20 DOT← • V-LINE →1 LINE ↔ 2 LINE 19 LINE ↔ 20 LINE← • TIME →1 M ↔ 2 M ↔ 3 M ↔ 4 M ↔ 5 M← Perform Steps 1-2 of LONG LIFE, then... 3. Use the v and w buttons to select "ORBITER". 4. Use the ᮤ and ᮣ buttons to select "AUTO1". The mode switches as follows each time the ᮤ or ᮣ button is pressed: →OFF ↔ AUTO1 ↔ AUTO2 ↔ MANUAL← H-DOT V-LINE TIME ORBITER : : : 2 DOT 4 LINE 3 M SEL. ADJ. EXIT RETURN LONG LIFE PLE : ORBITER : INVERSE : SCREEN WIPER : SOFT FOCUS : AUTO AUTO1 OFF OFF OFF SEL. Information ADJ. EXIT RETURN Information Ⅵ ORBITER Function settings H-DOT .......... Moves from 1 to 20 dots in the horizontal direction. V-LINE .......... Moves from 1 to 20 lines in the vertical direction. TIME Interval of 1~5 minutes (1 horizontal dot or 1 vertical line per interval). Ⅵ ORBITER settings OFF Orbiter mode does not function. This is the default setting when RGB is input. AUTO1 ......... The picture moves around the screen intermittently, making the picture smaller. This is the default setting when a Video or a DVD/HD/DTV singnal is input. Set to "OFF" when these signals are not used. AUTO2 ......... The picture moves around the screen intermittently, making the picture bigger. MANUAL ...... User can adjust the orbiter function (Horizontal Dot, Vertical Line and Time) manually. See the following explanation. * When a Video or a DVD/HD/DTV singnal is input, the AUTO1 and 2 functions will affect only the moving picture and will not make the screen smaller or bigger. INVERSE Use this to set the inverse mode or to display a white screen. Example: Setting "INVERSE" to "WHITE" Perform Steps 1-2 of LONG LIFE, then... 3. Use the v and w buttons to select "INVERSE". 4. Use the ᮤ and ᮣ buttons to select "WHITE". The mode switches as follows each time the ᮤ or ᮣ button is pressed: →OFF ↔ ON ↔ WHITE← LONG LIFE PLE : ORBITER : INVERSE : SCREEN WIPER : SOFT FOCUS : AUTO OFF WHITE OFF OFF SEL. ADJ. EXIT RETURN Adjust the ORBITER function manually Set the amount of shift and the time between movement. Example: Setting so that the picture moves 2 dots horizontally and 3 lines vertically every 3 minutes. Perform Steps 1-3 of ORBITER, then... 4. Use the ᮤ and ᮣ buttons to select "MANUAL", then press the MENU/ENTER button. THE "ORBITER" screen appears. 5. Adjust the items using the vwᮤ and ᮣ buttons. The mode switches as follows each time the ᮤ or ᮣ button is pressed: 28 Information Ⅵ INVERSE Settings ON ......... The picture is displayed alternately between positive image and negative image. You can set the time by pressing the MENU/ ENTER button while "ON" is set. OFF ....... Inverse mode does not function. WHITE ...The entire screen turns white. You can set the time by pressing the MENU/ ENTER button while "ON" is set.