Netgear AX3600 User Manual - Page 15
Wall-Mount Your Router
![]() |
View all Netgear AX3600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Nighthawk AX5 5-Stream WiFi Router Wall-Mount Your Router You can wall-mount your router using the wall-mounting holes on the bottom of your router. Note: We recommend using M3 x 20 mm screws. The following image shows an example of what the wall-mount holes on your router might look like: Figure 6. Bottom of the router To wall-mount your router: 1. Drill holes in the wall where you want to wall-mount your router. 2. Insert wall anchors in the holes. 3. Insert screws into the wall anchors, leaving 3/16 inch (0.5 cm) of each screw exposed. 4. Align the router's wall-mounting holes with the screws and mount your router. Hardware Setup 15 User Manual
![](/manual_guide/products/netgear-ax3600-user-manual-11e0f91/15.png)
Wall-Mount Your Router
You can wall-mount your router using the wall-mounting holes on the bottom of your
router.
Note:
We recommend using M3 x 20 mm screws.
The following image shows an example of what the wall-mount holes on your router
might look like:
Figure 6. Bottom of the router
To wall-mount your router:
1.
Drill holes in the wall where you want to wall-mount your router.
2.
Insert wall anchors in the holes.
3.
Insert screws into the wall anchors, leaving 3/16 inch (0.5 cm) of each screw exposed.
4.
Align the router’s wall-mounting holes with the screws and mount your router.
User Manual
15
Hardware Setup
Nighthawk AX5 5-Stream WiFi Router