Netgear DG834G DG834Gv5 Setup Manual - Page 37

Technical Specifications and Default Configuration, General Specifications - bridge

Page 37 highlights

Technical Specifications and Default Configuration This appendix provides technical specifications and factory default configuration settings for the wireless modem router. General Specifications The following table lists technical specification for the wireless modem router. Network Protocol and Standards Compatibility TCP/IP, DHCP, PPPoE or PPPoA, RFC 1483 Bridged or Routed Ethernet, and RFC 1577 Classical IP over ATM Power adapter North America: 120V, 60 Hz, input UK, Australia: 240V, 50 Hz, input Europe: 230V, 50 Hz, input Japan: 100V, 50/60 Hz, input All regions (output): 12 V DC @ 1.0A output Physical Dimensions: 6.9 in. x 1.1 in. x 4.7 in. (175.3 mm x 27.9 mm x 119.4 mm) Weight: 0.7 lbs. ( 0.3 kg) Environmental Operating temperature: 0° to 40° C (32º to 104º F) Operating humidity: 90% maximum relative humidity, noncondensing Regulatory compliance Meets requirements of: FCC Part 15 Class B; VCCI Class B; EN 55 022 (CISPR 22), Class B Interface specifications LAN: 10BASE-T or 100BASE-Tx, RJ-45 WAN: ADSL, Dual RJ-11, pins 2 and 3 T1.413, G.DMT ITU Annex A or B (ITU Annex A and ITU Annex B are separate models. The same unit cannot do both.) 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

33
Technical Specifications and Default
Configuration
This appendix provides technical specifications and factory default configuration settings for the
wireless modem router.
General Specifications
The following table lists technical specification for the wireless modem router.
Network Protocol and
Standards
Compatibility
TCP/IP, DHCP, PPPoE or PPPoA, RFC 1483 Bridged or Routed
Ethernet, and RFC 1577 Classical IP over ATM
Power adapter
North America: 120V, 60 Hz, input
UK, Australia: 240V, 50 Hz, input
Europe: 230V, 50 Hz, input
Japan: 100V, 50/60 Hz, input
All regions (output): 12 V DC @ 1.0A output
Physical
Dimensions: 6.9 in. x 1.1 in. x 4.7 in.
(175.3 mm x 27.9 mm x 119.4 mm)
Weight: 0.7 lbs. ( 0.3 kg)
Environmental
Operating temperature: 0
°
to 40
°
C
(32º to 104º F)
Operating humidity: 90% maximum relative humidity, noncondensing
Regulatory compliance
Meets requirements of: FCC Part 15 Class B; VCCI Class B; EN 55 022
(CISPR 22), Class B
Interface specifications
LAN: 10BASE-T or 100BASE-Tx, RJ-45
WAN: ADSL, Dual RJ-11, pins 2 and 3
T1.413, G.DMT
ITU Annex A or B (ITU Annex A and ITU Annex B are separate models.
The same unit cannot do both.)