Netgear DG834G DG834Gv5 Setup Manual - Page 38

Default Configuration, Table 2., Factory Default Configuration Settings - default admin password

Get Netgear DG834G - 54 Mbps Wireless ADSL Firewall Router PDF manuals and user guides
UPC - 606449029918
View all Netgear DG834G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Default Configuration You can use the reset button located on the rear panel of your Wireless ADSL2+ Modem Router to reset all settings to their factory defaults. This is called a hard reset. To perform a hard reset, push and hold the reset button for three seconds. Your Wireless ADSL2+ Modem Router will return to the factory configuration settings shown in the table below. Table 2. Factory Default Configuration Settings Feature Default Behavior Router Login User login URL http://www.routerlogin.net or http://www.routerlongin.com User name (case sensitive) admin Login password (case sensitive) password Internet Connection WAN MAC address Use default address WAN MTU size 1500 Port Speed AutoSense Local Network (LAN) Lan IP 192.168.0.1 Subnet mask 255.255.255.0 DHCP server Enabled DHCP starting IP address 192.168.0.2 DHCP ending IP address 192.168.0.254 DMZ Disabled Time zone GMT Time zone adjusted for daylight saving Disabled time Firewall Inbound (communications coming in from Disabled (except traffic on port 80, the http port) the Internet) Outbound (communications going out to Enabled (all) the Internet) Source MAC filtering Disabled 34 Technical Specifications and Default Configuration

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
34
Technical Specifications and Default Configuration
Default Configuration
You can use the reset button located on the rear panel of your Wireless ADSL2+ Modem Router to
reset all settings to their factory defaults. This is called a hard reset. To perform a hard reset, push
and hold the reset button for three seconds. Your Wireless ADSL2+ Modem Router will return to
the factory configuration settings shown in the table below.
Table 2.
Factory Default Configuration Settings
Feature
Default Behavior
Router Login
User login URL
or
User name (case sensitive)
admin
Login password (case sensitive)
password
Internet Connection
WAN MAC address
Use default address
WAN MTU size
1500
Port Speed
AutoSense
Local Network (LAN)
Lan IP
192.168.0.1
Subnet mask
255.255.255.0
DHCP server
Enabled
DHCP starting IP address
192.168.0.2
DHCP ending IP address
192.168.0.254
DMZ
Disabled
Time zone
GMT
Time zone adjusted for daylight saving
time
Disabled
Firewall
Inbound (communications coming in from
the Internet)
Disabled (except traffic on port 80, the http port)
Outbound (communications going out to
the Internet)
Enabled (all)
Source MAC filtering
Disabled