Netgear DG834GUv5 Reference Manual - Page 156
Click Apply. The Get VPN Policies web is displayed., General, Remote Address Data e.g.
View all Netgear DG834GUv5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
DG834G Reference Manual 5. Click Apply. The Get VPN Policies web page is displayed. Figure 8-44: VPN Policies Screen 6. Repeat for the DG834G on LAN B and pay special attention to use the following network settings as appropriate. • General, Remote Address Data (e.g., 14.15.16.17) • Remote LAN, Start IP Address - IP Address (e.g, 192.168.0.1) - Subnet Mask (e.g., 255.255.255.0) - Preshared Key (e.g., 12345678) 7. Use the VPN Status screen to activate the VPN tunnel by performing the following steps: Note: The VPN Status screen is only one of three ways to active a VPN tunnel. See "Activating a VPN Tunnel" on page -27 for information on the other ways. a. Open the DG834G management interface and click on VPN Status to display the VPN Status/Log screen (Figure 8-45). 8-46 v3.0, September 2005 Virtual Private Networking