Netgear DG834GUv5 Reference Manual - Page 200
Monitoring the VPN Tunnel (Telecommuter Example)
View all Netgear DG834GUv5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
DG834G Reference Manual a. Establish an Internet connection from the PC. b. On the Windows taskbar, click the Start button, and then click Run. c. Type ping -t 192.168.0.1, and then click OK. Figure C-23: Running a ping test to the LAN from the PC This will cause a continuous ping to be sent to the VPN router. After between several seconds and two minutes, the ping response should change from timed out to reply. Figure C-24: Ping test results Once the connection is established, you can open the browser of the PC and enter the LAN IP address of the VPN router. After a short wait, you should see the login screen of the VPN router (unless another PC already has the VPN router management interface open). Note: You can use the VPN router diagnostic utilities to test the VPN connection from the VPN router to the client PC. Run ping tests from the Diagnostics link of the VPN router main menu. Monitoring the VPN Tunnel (Telecommuter Example) Viewing the PC Client's Connection Monitor and Log Viewer To view information on the progress and status of the VPN client connection, open the 54 Mbps Wireless ADSL Modem Router Model DG834G Log Viewer. C-26 v3.0, September 2005 NETGEAR VPN Configuration