Netgear DG834GUv5 Reference Manual - Page 188
Configuration Summary (Telecommuter Example), toDG834, dg834g.dyndns.org
View all Netgear DG834GUv5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
DG834G Reference Manual a. In Step 1, enter toDG834 for the Connection Name. b. In Step 2, enter dg834g.dyndns.org for the remote WAN's IP address. c. In Step 3, enter the following: • IP Address = 10.5.6.1 • Subnet Mask = 255.255.255.0 7. Test the VPN tunnel by pinging the remote network from a PC attached to the DG834G. a. Open the command prompt (Start -> Run -> cmd) b. ping 172.23.9.1 Figure C-11: ping 172.23.9.1 Note: The pings may fail the first time. If this happens, try the pings a second time. Configuration Summary (Telecommuter Example) The configuration in this document follows the addressing and configuration mechanics defined by the VPN Consortium. Gather all the necessary information before you begin the configuration process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and all of the parameters that need to be set on both sides. Assure that there are no firewall restrictions. C-14 v3.0, September 2005 NETGEAR VPN Configuration