Netgear DG834GUv5 Reference Manual - Page 187
toFVL328, fvl328.dyndns.org, 23.9.1
View all Netgear DG834GUv5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
DG834G Reference Manual Figure C-10: Status Screen 5. Configure the DG834G as in the Gateway-to-Gateway procedures using the VPN Wizard (see "How to Set Up a Gateway-to-Gateway VPN Configuration" on page -20), being certain to use appropriate network addresses for the environment. The LAN Addresses used in this example are as follows. • DG834G LAN IP = 10.5.6.1 LAN Subnet Mask = 255.255.255.0 • FVL328 LAN IP = 172.23.9.1 LAN Subnet Mask = 255.255.255.0 a. In Step 1, enter toFVL328 for the Connection Name. b. In Step 2, enter fvl328.dyndns.org for the remote WAN's IP address. c. In Step 3, enter the following: • IP Address = 172.23.9.1 • Subnet Mask = 255.255.255.0 6. Configure the FVL328 as in the Gateway-to-Gateway procedures for the VPN Wizard (see "How to Set Up a Gateway-to-Gateway VPN Configuration" on page -20), being certain to use appropriate network addresses for the environment. NETGEAR VPN Configuration v3.0, September 2005 C-13