Netgear DG834GUv5 Reference Manual - Page 50

DG834G Reference Manual 6. For initial configuration and test, leave the Wireless Card Access List set to allow everyone access by making sure that "Turn Access Control On" is not selected in the Wireless Station Access List. In addition, leave the Encryption Strength set to "Disabled." 7. Click Apply to save your changes. Note: If you are configuring the firewall from a wireless computer and you change the firewall's SSID, channel, or security settings, you will lose your wireless connection when you click Apply. You must then change the wireless settings of your computer to match the firewall's new settings. 8. Configure and test your computers for wireless connectivity. Program the wireless adapter of your computers to have the same SSID and channel that you configured in the router. Check that they have a wireless link and are able to obtain an IP address by DHCP from the firewall. Once your computers have basic wireless connectivity to the firewall, you can configure the advanced wireless security functions of the firewall. How to Restricting Wireless Access to Your Network By default, any wireless PC that is configured with the correct SSID will be allowed access to your wireless network. For increased security, the 54 Mbps Wireless ADSL Modem Router Model DG834G provides several ways to restrict wireless access to your network: • Turn off wireless connectivity completely • Restrict access based on the Wireless Network Name (SSID) • Restrict access based on the Wireless Card Access List These options are discussed below. Figure 4-3 4-8 v3.0, September 2005 Wireless Configuration