Netgear DGN2200v1 DGN2200 Setup Manual - Page 40

Default Configuration You can use the Restore Factory Settings button located on the bottom of your router to reset all settings to their factory defaults. This is called a hard reset. To perform a hard reset, push and hold the Restore Factory Settings button for 6 seconds. Your router will return to the factory configuration settings that are shown in the table below. Feature Router Login User login URL User name (case sensitive) Login password (case sensitive) Internet Connection WAN MAC address WAN MTU size Port speed Local Network (LAN) LAN IP Subnet mask RIP direction RIP version RIP authentication DHCP server DHCP starting IP address DHCP ending IP address DMZ Time zone Time zone adjusted for daylight saving time Default Behavior http://www.routerlogin.net or http://www.routerlogin.com admin password Use default address 1492 AutoSense 192.168.0.1 255.255.255.0 None Disabled None Enabled 192.168.0.2 192.168.0.254 Disabled GMT-8 for NA version, GMT for WW version, GMT + 1 for Annex B German version Disabled Technical Specifications 36