Netgear DGN2200v1 DGN2200 Setup Manual - Page 7

Router Front Panel The wireless-N modem router front panel shown below contains status LEDs. Power Figure 2 LAN Ports (1-4) USB DSL Internet Wireless WPS You can use the LEDs to verify status and connections. The following table lists and describes each LED and button on the front panel of the wireless-N modem router. Table 1. LED and Front Panel Button Descriptions LED Power LED Activity Solid green Solid Red Off Factory Reset LAN Ports 1 - 4 Solid green Blinking green Off Description Solid green. Power is supplied to the router. POST (Power-On Self-Test) failure or device malfunction Power is not supplied to the router Lights momentarily when the Restore Factory Settings button is pressed for 6 seconds, then blinks red three times when released. It then turns green as the gateway resets to the factory defaults. The Local port has detected an Ethernet link with a device. Data is being transmitted or received. No link is detected on this port. Getting to Know Your Wireless Router 3