Netgear DGND3700v1 [English]: DGND3700 User Manual (PDF) - Page 132

N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700 the Wireless Settings screen, select Setup Access List to display the Wireless Access List screen. Building Wireless Bridging and Repeating Networks With the DGND3700 wireless modem router, you can build large bridged wireless networks that form an IEEE 802.11n Wireless Distribution System (WDS). Using the modem router with other access points (APs) and wireless devices, you can connect clients by using their MAC addresses rather than by specifying IP addresses. Here are some examples of wireless bridged configurations: • Point-to-point bridge. The wireless modem router communicates with another bridge-mode wireless station. See Point-to-Point Bridge Configuration on page 133. • Multi-point bridge. The wireless modem router is the "master" for a group of bridge-mode wireless stations. Then all traffic is sent to this master, rather than to other access points. See Multi-Point Bridge on page 134. • Repeater with wireless client association. Sends all traffic to the remote access point. See Repeater with Wireless Client Association on page 136. Note: The wireless bridging and repeating feature uses the default security profile to send and receive traffic. Advanced Settings 132