Netgear DM111Pv1 DM111Pv1 Reference Manual - Page 17

DM111P ADSL2+ Ethernet Modem Reference Manual The Modem's Front Panel The DM111P ADSL2+ Ethernet Modem front panel shown below contains status LEDs. 1 2 3 4 Figure 1-1 You can use the LEDs to verify various conditions. Table 1-1 lists and describes each LED on the front panel of the modem. These LEDs are green when lit. Table 1-1. LED Descriptions Label Activity 1. Power 2. LAN 3. ADSL 4. Internet Solid On (Green) Blinking (Green) Solid On (Red) Off Solid On (Green) Off Solid On (Green) Blinking (Green) Off Solid On (Green) Off Description Power is supplied and the modem in its normal operating mode. Firmware update is in progress Self test is in progress or self-test failed Power is not supplied to the modem. A device is connected to the yellow Ethernet port. No device is connected to the yellow Ethernet port. The modem is synchronized with your service provider's DSLAM. The modem is synchronizing with your service provider;s DSLAM. No ADSL link detected. Internet connection is active. Modem is powered off, or is in bridged mode, or there is no ADSL connection. Introduction 1-5 v1.0, August 2006