Netgear DM111Pv1 DM111Pv1 Reference Manual - Page 21
Using ADSL Microfilters with Built-In Splitters., Connecting your Modem to your Computer
View all Netgear DM111Pv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Line DM111P ADSL2+ Ethernet Modem Reference Manual Using ADSL Microfilters with Built-In Splitters. Use an ADSL microfilter with built-in splitter when there is a single wall outlet that must provide connectivity for both the modem and telephone equipment. ADSL Phone Figure 2-2 Connecting your Modem to your Computer Before starting the utility, physically connect the modem as follows: 1. Connect the yellow Ethernet cable between the yellow Ethernet port on the modem and the Ethernet port on your PC. Note: If you intend to connect to a router, do so after you have successfully obtained an Internet connection when your modem is directly connected to the PC. Refer to the documentation that came with the router for its installation instructions. 2. Connect the ADSL port on your modem to your telephone jack. PC Ethernet Port Telephone Jack DM111 ADSL2+ Ethernet Modem Figure 2-3 Connecting to the Internet 2-3 v1.0, August 2006