Netgear DM111Pv1 DM111Pv1 Reference Manual - Page 34

Table 3-1. Menu 3.2 - Modem Status Fields, This screen shows the following parameters

Page 34 highlights

DM111P ADSL2+ Ethernet Modem Reference Manual This screen shows the following parameters: Table 3-1. Menu 3.2 - Modem Status Fields Field Description System Up Time The time that the modem has been connected to the Internet in the format days:hours:minutes:seconds. Account Name The Account Name assigned to the modem during setup. Firmware Version Displays the modem firmware version. This value will change if you upgrade your modem. ADSL Port These parameters apply to the Internet (ADSL) port of the modem. MAC Address Displays the Ethernet MAC address being used by the Internet (ADSL) port of the modem. IP Address Displays the IP address being used by the Internet (ADSL) port of the modem. If no address is shown, the modem cannot connect to the Internet. Network Type The network type depends on your ISP. IP Subnet Mask This field displays the IP Subnet Mask being used by the Internet (ADSL) port of the modem. Domain Name Server (DNS) Displays the DNS Server IP addresses being used by the modem. These addresses are usually obtained dynamically from the ISP. LAN Port These parameters apply to the Ethernet port of the modem. MAC Address Displays the Ethernet MAC address being used by the Local (LAN) port of the modem. IP Address Displays the IP address being used by the Local (LAN) port of the modem. The default is 192.168.0.1. DHCP If OFF, the modem will not assign IP addresses to PCs on the LAN. If ON, the modem will assign IP addresses to PCs on the LAN. IP Subnet Mask Displays the IP Subnet Mask being used by the Local (LAN) port of the modem. The default is 255.255.255.0. Modem These parameters apply to the ADSL port of the modem. Modem Status The connection status of the modem. Downstream Speed The speed at which the modem is receiving data from the ADSL line. Upstream Speed The speed at which the modem is transmitting data to the ADSL line. VPI The Virtual Path Identifier setting. VCI The Virtual Channel Identifier setting. 3-6 Managing Your Modem v1.0, August 2006

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50

DM111P ADSL2+ Ethernet Modem Reference Manual
3-6
Managing Your Modem
v1.0, August 2006
This screen shows the following parameters:
Table 3-1. Menu 3.2 - Modem Status Fields
Field
Description
System Up Time
The time that the modem has been connected to the Internet in the
format days:hours:minutes:seconds.
Account Name
The Account Name assigned to the modem during setup.
Firmware Version
Displays the modem firmware version. This value will change if you
upgrade your modem.
ADSL Port
These parameters apply to the Internet (ADSL) port of the modem.
MAC Address
Displays the Ethernet MAC address being used by the Internet (ADSL)
port of the modem.
IP Address
Displays the IP address being used by the Internet (ADSL) port of the
modem. If no address is shown, the modem cannot connect to the
Internet.
Network Type
The network type depends on your ISP.
IP Subnet Mask
This field displays the IP Subnet Mask being used by the Internet (ADSL)
port of the modem.
Domain Name Server (DNS)
Displays the DNS Server IP addresses being used by the modem. These
addresses are usually obtained dynamically from the ISP.
LAN Port
These parameters apply to the Ethernet port of the modem.
MAC Address
Displays the Ethernet MAC address being used by the Local (LAN) port
of the modem.
IP Address
Displays the IP address being used by the Local (LAN) port of the
modem. The default is 192.168.0.1.
DHCP
If OFF, the modem will not assign IP addresses to PCs on the LAN.
If ON, the modem will assign IP addresses to PCs on the LAN.
IP Subnet Mask
Displays the IP Subnet Mask being used by the Local (LAN) port of the
modem. The default is 255.255.255.0.
Modem
These parameters apply to the ADSL port of the modem.
Modem Status
The connection status of the modem.
Downstream Speed
The speed at which the modem is receiving data from the ADSL line.
Upstream Speed
The speed at which the modem is transmitting data to the ADSL line.
VPI
The Virtual Path Identifier setting.
VCI
The Virtual Channel Identifier setting.