Netgear FS108P Configuring for Avaya IP Telephones - Page 12
NETGEAR FS726TP PVID Default VLAN Configuration
UPC - 606449037814
View all Netgear FS108P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
4.2.4. Define the Default VLAN for untagged packets Select PVID Setting from the pull-down menu and assign the Data VLAN (100) to each of the PoE Ports and the uplink port as the default VLAN for those ports. Select Apply. Figure 9: NETGEAR FS726TP PVID (Default) VLAN Configuration Using the Data VLAN as the Default VLAN for the Avaya IP Telephones is essential to the correct operation of a PC attached to the telephone. In most situations, the PC will not be providing IEEE802.1Q tags and the data traffic needs to be on a separate VLAN from the Voice traffic for prioritization. Select VLAN 1 (Default) from the pull-down menu and remove (Not Member) the ports using the Voice VLAN (1-12 and 26). The DHCP services on the Data VLAN need to be configured to move telephones that have not been correctly configured to the Voice VLAN. The administration is covered in Section 5.1.1. JJA; Reviewed: SPOC 5/17/2007 Solution & Interoperability Test Lab Application Notes ©2007 Avaya Inc. All Rights Reserved. 12 of 20 NETGEARAppNotes.doc