Netgear GS108E ProSafe Plus Switches Configuration Utility User Guide - Page 19
Set the IP Address Information, Maintenance, Change Password, Device Reboot
View all Netgear GS108E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
ProSafe Plus Switch Utility Set the IP Address Information Enter IP address and subnet mask values for the switch as well as the address of the gateway device used by the switch. To specify IP interface information: 1. Select System > Status > Switch Information. The Switch Information screen displays. 2. In the DHCP Mode list, select Disable. The IP Address, Subnet Mask, and Gateway Address fields are enabled. 3. Enter the IP address, subnet mask, and if available, the gateway address, and click Apply. Maintenance The Maintenance feature allows you to change the password for the selected switch, perform a device reboot, reset the switch to its factory default settings, or upgrade the switch firmware. Change Password To change the password for a switch: 1. Select System > Maintenance. The Maintenance menu and Change Password screen display. 2. Enter the old password (the default is password) and then enter the new password. 3. Click Apply. Device Reboot WARNING: Rebooting the switch to briefly disrupts network traffic through the switch. To reboot the selected switch: 1. Select System > Maintenance > Device Reboot. The Device Reboot screen displays. 2. Select the check box in the Device Reboot screen. 3. Click Apply. Network and System Configuration 19