Netgear GS108E ProSafe Plus Switches Configuration Utility User Guide - Page 22
Cable Test, MultiCast, IGMP Snooping - ip address
View all Netgear GS108E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
ProSafe Plus Switch Utility Cable Test Some switch models have a cable testing feature that allows you to check for cable faults. If a cable fault is found on a port, the cable test gives an estimate of the distance of the fault from the switch. To perform a cable test: 1. Click System > Monitoring > Cable Tester. The Cable Tester screen displays. 2. Select the ports to be tested and click TEST SELECTED PORT. If a problem with the cable is found, the approximate distance to the cable fault is displayed. Note: The distance to the cable fault can be up to 5 meters from the actual fault. MultiCast IGMP Snooping Internet Group Management Protocol (IGMP) snooping allows a switch to forward multicast traffic intelligently on the switch. Multicast IP traffic is traffic that is destined to a host group. Host groups are identified by class D IP addresses, which range from 224.0.0.0 to 239.255.255.255. Based on the IGMP query and report messages, the switch forwards traffic Network and System Configuration 22