Netgear GS510TLP User Manual - Page 101
DHCP L2 Relay Interface Configuration
View all Netgear GS510TLP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 6. Select the Enable radio button The default admin mode is disabled. 7. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. DHCP L2 Relay Interface Configuration You can view and configure the DHCP L2 relay interface. To configure DHCP L2 relay interface settings: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System> Services > DHCP L2 Relay > DHCP L2 Relay Interface Configuration. 6. Select one or more interfaces by taking one of the following actions: • To configure a single interface, select the check box associated with the port, or type the port number in the Go To Interface field and click the Go button. • To configure multiple interfaces with the same settings, select the check box associated with each interface. • To configure all interfaces with the same settings, select the check box in the heading row. Configure System Information 101