Netgear GS510TLP User Manual - Page 58
View the DayLight Saving Time Status, Password
View all Netgear GS510TLP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP Table 16. Daylight saving setting is Non Recurring (continued) Field Ends At Offset Zone Description These fields are used to configure the end values of date and time. • Week. Configure the end week. • Day. Configure the end day. • Month. Configure the end month. • Hours. Configure the end hours. • Minutes. Configure the end minutes. Specify the number of minutes to shift the summer time from the standard time. The valid range is 1-1440 minutes. Specify the acronym associated with the time zone when summer time is in effect. This field is not validated against an official list of time zone acronyms. View the DayLight Saving Time Status The Daylight Saving (DST) Status section shows information about the summer time settings and whether the time shift for summer time is currently in effect. To view the daylight saving time status: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System > Management > Time > DayLight Saving Configuration. Configure System Information 58