Netgear GS510TLP User Manual - Page 402
Reboot the Switch, Reset the Switch to Its Factory Default Settings, Password
View all Netgear GS510TLP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 402 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP Reboot the Switch You can reboot the switch from the web management interface. To reboot the switch: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Maintenance > Reset > Device Reboot. 6. Select the check box. 7. Click the Apply button. The switch reboots. Reset the Switch to Its Factory Default Settings You can reset the system configuration to the factory default values. All changes that you made are lost. If the IP address changes, your web session might disconnect. Note: If you reset the switch to the default configuration, the IP address is reset to 192.168.0.239, and the DHCP client is enabled. If you lose network connectivity after you reset the switch to the factory defaults, see Change the Default IP Address of the Switch on page 11. Maintenance 402