Netgear GS510TLP User Manual - Page 82
Delete an SNMP Community, Password, System > SNMP > SNMP V1/V2 > Community Configuration
View all Netgear GS510TLP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System > SNMP > SNMP V1/V2 > Community Configuration. The Community Configuration page displays. 6. Select the check box next to the community. 7. Update the desired fields. 8. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. Delete an SNMP Community To delete an SNMP community: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select System > SNMP > SNMP V1/V2 > Community Configuration. The Community Configuration page displays. 6. Select the check box next to the community to remove. 7. Click the Delete button. The community is removed. Configure System Information 82