Netgear GS510TLP User Manual - Page 222
IPv6 Prefix Configuration, Routing > IPv6 > Advanced > Prefix Configuration
View all Netgear GS510TLP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 222 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP IPv6 Prefix Configuration Configure IPv6 prefix configuration: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Routing> IPv6 > Advanced > Prefix Configuration. 6. From the Interface menu, select the interface to be configured. When the selection is changed, the page refreshes, causing all fields to be updated for the newly selected interface. 7. In the IPv6 Prefix field, specify the IPv6 prefix for an interface. 8. In the Prefix Length field, specify the IPv6 prefix length for an interface. 9. From the EUI64 menu, select Enable or Disable to indicate whether the specified 64-bit unicast prefix is enabled. 10. In the Valid Life Time field, specify the router advertisement per prefix time. This is the time allowed to consider the prefix valid for the purpose of on-link determination. The valid life time is 0 to 4294967295. 11. In the Preferred Life Time field, specify the router advertisement per prefix time. An autoconfigured address generated from this prefix is preferred. The preferred life time must be in the range 0 to 4294967295. Configure Routing 222