Netgear GS510TLP User Manual - Page 180
Con IGMP Snooping for VLANs, Password
View all Netgear GS510TLP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP Enter six two-digit hexadecimal numbers separated by colons, for example 00:01:23:43:45:67. 7. Click the Go button. If the address exists, the entry is displayed. An exact match is required. The following table describes the information in the IGMP snooping table. Table 48. IGMP Snooping Table information Field MAC Address VLAN ID Type Description Interface Description The multicast MAC address for which the switch holds forwarding and/or filtering information. The format is six two-digit hexadecimal numbers that are separated by colons, for example, 01:00:5e:45:67:89. The VLAN ID for which the switch holds forwarding and filtering information. The type of the entry. Static entries are those that are configured by the end user. Dynamic entries are added to the table as a result of a learning process or protocol. The text description of this multicast table entry. Possible values are Management Configured, Network Configured, and Network Assisted. The interfaces that are designated for forwarding (Fwd) and filtering (Flt) for the associated address. Configure IGMP Snooping for VLANs To configure IGMP snooping settings for VLANs: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching> Multicast > IGMP Snooping > IGMP VLAN Configuration. Configure Switching 180