Netgear GS510TLP User Manual - Page 289
Modify the Settings for a RADIUS Accounting Server on the Switch, Apply, Clear, Counters
View all Netgear GS510TLP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 289 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP The server is added to the switch. 12. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. The following table describes the RADIUS server statistics displayed on the page. 13. To reset the accounting server and RADIUS statistics to their default values, click the Clear Counters button. Table 77. RADIUS accounting server statistics information Field Description Accounting Server Address The accounting server associated with the statistics. Round Trip Time (secs) The time interval, in hundredths of a second, between the most recent accounting-response and the accounting-request that matched it from this RADIUS accounting server. Accounting Requests The number of RADIUS accounting-request packets sent not including retransmissions. Accounting Retransmissions The number of RADIUS accounting-request packets retransmitted to this RADIUS accounting server. Accounting Responses The number of RADIUS packets received on the accounting port from this server. Malformed Accounting Responses The number of malformed RADIUS accounting-response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators and unknown types are not included as malformed accounting responses. Bad Authenticators The number of RADIUS accounting-response packets that contained invalid authenticators received from this accounting server. Pending Requests The number of RADIUS accounting-request packets sent to this server that did not yet time out or receive a response. Timeouts The number of accounting time-outs to this server. Unknown Types The number of RADIUS packets of unknown type that were received from this server on the accounting port. Packets Dropped The number of RADIUS packets that were received from this server on the accounting port and dropped for some other reason. Modify the Settings for a RADIUS Accounting Server on the Switch To modify the settings for a RADIUS accounting server on the switch: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. Manage Device Security 289