Netgear GS510TLP User Manual - Page 137
Con VLAN Membership, Switching > VLAN > Advanced > VLAN Configuration
View all Netgear GS510TLP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Switching> VLAN > Basic > VLAN Configuration. You can also select Switching> VLAN > Advanced > VLAN Configuration. The VLAN Configuration page displays. 6. Select the Reset Configuration check box. 7. Click the Apply button. The updated configuration is sent to the switch. Configuration changes take effect immediately. The default values are as follows: • All ports are assigned to the default VLAN of 1. • All ports are configured with a PVID of 1. • All ports are configured to an Acceptable Frame Types value of Admit All Frames. • All ports are configured with ingress filtering disabled. • All ports are configured to transmit only untagged frames. • GVRP is disabled on all ports and all dynamic entries are cleared. All VLANs, except for the default VLAN, are deleted. Configure VLAN Membership To configure VLAN membership: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired connection to connect your computer to the network, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. Configure Switching 137