Netgear GS510TLP User Manual - Page 234
Password, password, Routing > VLAN > VLAN Routing Wizard, VLAN ID, IP Address, Network Mask, T
View all Netgear GS510TLP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
ProSAFE 8-Port or 16-Port Gigabit Smart Managed Switch Model GS418TPP, GS510TLP, and GS510TPP 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Change the Default IP Address of the Switch on page 11. The login window opens. 4. Enter the switch's password in the Password field. The default password is password. The System Information page displays. 5. Select Routing> VLAN > VLAN Routing Wizard. 6. In the VLAN ID field, specify the VLAN ID that is associated with the VLAN. The range of the VLAN ID is 1 to 4093. 7. In the IP Address field, define the IP address of the VLAN interface. 8. In the Network Mask field, define the subnet mask of the VLAN interface. 9. In the Ports table, click each port once, twice, or three times to configure one of the following modes or reset the port to the default settings: • T (Tagged). Select the ports on which all frames transmitted for this VLAN are tagged. The ports that are selected are included in the VLAN. • U (Untagged). Select the ports on which all frames transmitted for this VLAN are untagged. The ports that are selected are included in the VLAN. By default, the selection is blank, which means that the port is excluded from the VLAN but can be dynamically registered (autodetected) in the VLAN through GVRP. 10. In the LAG table, click each LAG once, twice, or three times to configure one of the following modes or reset the LAG to the default settings: • T (Tagged). Select the LAGs on which all frames transmitted for this VLAN are tagged. The LAGs that are selected are included in the VLAN. Configure Routing 234