Netgear GSM7224 GSM7224 User Manual - Page 117
snmp trap link-status all, spanning-tree, Format
UPC - 606449069150
View all Netgear GSM7224 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Mode Interface Config snmp trap link-status all This command enables link status traps for all interfaces. Note: This command is valid only when the Link Up/Down Flag is enabled (see "snmp-server enable traps linkmode"). Format snmp trap link-status all Mode Global Config no snmp trap link-status all This command disables link status traps for all interfaces. Note: This command is valid only when the Link Up/Down Flag is enabled (see "snmp-server enable traps linkmode"). Format no snmp trap link-status all Mode Global Config spanning-tree This command sets the STP mode for a specific port-channel (LAG). This is the value specified for STP Mode on the Port Configuration Menu. 802.1D mode is the default. The interface is a logical slot and port for a configured port-channel. The all option sets all configured portchannels (LAGs) with the same option. Format spanning-tree { | all} {off | 802.1d | fast} Mode Global Config The mode is one of the following: 802.1d IEEE 802.1D-compliant STP mode is used fast Fast STP mode is used off STP is turned off Switching Commands 202-10009-01_060204 8-65