Netgear GSM7224 GSM7224 User Manual - Page 66
show running-config, show sysinfo, snmp-server, Format, Switch Description, System Name - reset to factory default
UPC - 606449069150
View all Netgear GSM7224 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Note: Message log information is not retained across a switch reset. show running-config This command is used to display the current setting of different protocol packages supported on switch. This command displays only those parameters, the values of which differ from default value. The output is displayed in the script format, which can be used to configure another switch with same configuration. Format show running-config Mode Privileged EXEC show sysinfo This command displays switch information. Format Mode Switch Description System Name System Location System Contact System ObjectID System Up Time MIBs Supported show sysinfo Privileged EXEC Text used to identify this switch. Name used to identify the switch. Text used to identify the location of the switch. May be up to 31 alpha-numeric characters. The factory default is blank. Text used to identify a contact person for this switch. May be up to 31 alpha-numeric characters. The factory default is blank. The base object ID for the switch's enterprise MIB. The time in days, hours and minutes since the last switch reboot. A list of MIBs supported by this agent. snmp-server This command sets the name and the physical location of the switch, and the organization responsible for the network.The range for name, location and contact is from 1 to 31 alphanumeric characters. Default Format None snmp-server {sysname | location | contact } 8-14 202-10009-01_060204 Switching Commands