Netgear GSM7224 GSM7224 User Manual - Page 170
ip dhcp excluded-address, ip dhcp ping packets, Default
![]() |
UPC - 606449069150
View all Netgear GSM7224 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software ip dhcp excluded-address This command specifies the IP addresses that a DHCP server should not assign to DHCP clients. Low-address and high-address are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. Default None Format ip dhcp excluded-address [highaddress] Mode Global Config no ip dhcp excluded-address This command removes the excluded IP addresses for a DHCP client. Low-address and high-address are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. Format no ip dhcp excluded-address [highaddress] Mode Global Config ip dhcp ping packets This command is used to specify the number in a range from 2-10, of packets a DHCP server sends to a pool address as part of a ping operation. Setting the number of ping packets to 0 is the same as 'no ip dhcp ping packets' and will prevent the server from pinging pool addresses. Default 2 Format ip dhcp ping packets Mode Global Config no ip dhcp ping packets This command prevents the server from pinging pool addresses and will set the number of packets to 0. Default 0 Format no ip dhcp ping packets Mode Global Config 9-4 DHCP Server Commands 202-10009-01_060204
![](/manual_guide/products/netgear-gsm7224-gsm7224-user-manual-1-71e0637/170.png)