Netgear GSM7224 GSM7224 User Manual - Page 46
Mode-based Topology, Table 7-1., Command Mode, continued
![]() |
UPC - 606449069150
View all Netgear GSM7224 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Table 7-1. Command Mode (continued) Command Mode Access Method Prompt Global Config Mode From the Privileged Exec mode, enter the configure command. Switch (Config)# Interface Config Mode Line Config Mode From the Global Configuration mode, enter the interface config command. From the Global Configuration mode, enter the lineconfig command. Switch (Interface-"if number")# Switch (line) # Exit or Access Next Mode To exit to the Privileged Exec mode, enter the exit command, or press Ctrl-Z to switch to user exec mode. To exit to the Global Config mode enter exit. To return to user EXEC mode enter ctrl-Z. To exit to the Global Config mode enter exit. To return to User Exec mode enter ctrl-Z. Mode-based Topology The CLI tree is built on a mode concept where the commands are available according to the interface. Some of the modes are depicted in the mode-based CLI Figure 1. 7-2 Mode-based CLI 202-10009-01_060204
![](/manual_guide/products/netgear-gsm7224-gsm7224-user-manual-1-71e0637/46.png)