Netgear GSM7224 GSM7224 User Manual - Page 40
copy system:running-config nvram:startup-config, Web Browser - default ip
UPC - 606449069150
View all Netgear GSM7224 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software • Web Browser Note: The user should do a copy system:running-config nvram:startup-config after configuring the network parameters so that the configurations are not lost Table 6-4. Quick Start up IP Address Command Details show network (in User EXEC) network parms (in Privileged EXEC) Displays the Network Configurations IP Address - IP Address of the interface Default IP is 0.0.0.0 Subnet Mask - IP Subnet Mask for the interface Default is 0.0.0.0 Default Gateway - The default Gateway for this interface Default value is 0.0.0.0 Burned in MAC Address - The Burned in MAC Address used for inband connectivity Network Configurations Protocol Current - Indicates which network protocol is being used Default is none Management VLAN Id - Specifies VLAN id Web Mode - Indicates whether HTTP/Web is enabled. Java Mode - Indicates whether java mode is enabled. network parms [] IP Address range from 0.0.0.0 to 255.255.255.255 Subnet Mask range from 0.0.0.0 to 255.255.255.255 Gateway Address range from 0.0.0.0 to 255.255.255.255 Note: The IP address assigned to network in the above table will not be routable. If access to management CPU via the routable interface is desired, use the ip command. 6-4 Quick Start up 202-10009-01_060204