Netgear GSM7224 GSM7224 User Manual - Page 64

show logging, show mac-addr-table, Time Since Counters Last Cleared, Format

Page 64 highlights

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Dynamic VLAN Entries - The number of presently active VLAN entries on this switch that have been created by GVRP registration. VLAN Deletes - The number of VLANs on this switch that have been created and then deleted since the last reboot. Time Since Counters Last Cleared The elapsed time, in days, hours, minutes, and seconds, since the statistics for this switch were last cleared. show logging This command displays the trap log maintained by the switch. The trap log contains a maximum of 256 entries that wrap. Format show logging Mode Privileged EXEC Number of Traps since last reset The number of traps that have occurred since the last reset of this device. Number of Traps since log last displayed The number of traps that have occurred since the traps were last displayed. Getting the traps by any method (terminal interface display, Web display, upload file from switch etc.) will result in this counter being cleared to 0. Log The sequence number of this trap. System Up Time The relative time since the last reboot of the switch at which this trap occurred. Trap The relevant information of this trap. Note: Trap log information is not retained across a switch reset. show mac-addr-table This command displays the forwarding database entries. If the command is entered with no parameter, the entire table is displayed. This is the same as entering the optional all parameter. Alternatively, the administrator can enter a MAC Address to display the table entry for the requested MAC address and all entries following the requested MAC address. Format show mac-addr-table [ | all] Mode Privileged EXEC 8-12 202-10009-01_060204 Switching Commands

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
8-12
Switching Commands
202-10009-01_060204
Dynamic VLAN Entries
- The number of presently active
VLAN entries on this switch that have been created by GVRP
registration.
VLAN Deletes
- The number of VLANs on this switch that have
been created and then deleted since the last reboot.
Time Since Counters Last Cleared
The elapsed time, in days, hours, minutes, and sec-
onds, since the statistics for this switch were last cleared.
show logging
This command displays the trap log maintained by the switch.
The trap log contains a maximum of 256 entries that wrap.
Format
show logging
Mode
Privileged EXEC
Number of Traps since last reset
The number of traps that have occurred since the last
reset of this device.
Number of Traps since log last displayed
The number of traps that have occurred
since the traps were last displayed. Getting the traps by any
method (terminal interface display, Web display, upload file from
switch etc.) will result in this counter being cleared to 0.
Log
The sequence number of this trap.
System Up Time
The relative time since the last reboot of the switch at which this
trap occurred.
Trap
The relevant information of this trap.
Note:
Trap log information is not retained across a switch reset.
show mac-addr-table
This command displays the forwarding database entries. If the command is entered with no
parameter, the entire table is displayed. This is the same as entering the optional
all
parameter.
Alternatively, the administrator can enter a MAC Address to display the table entry for the
requested MAC address and all entries following the requested MAC address.
Format
show mac-addr-table [<macaddr> | all]
Mode
Privileged EXEC