Netgear GSM7224 GSM7224 User Manual - Page 45

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Chapter 7 Mode-based CLI The CLI groups all the commands in appropriate modes according to the nature of the command. A sample of the CLI command modes are described below. Each of the command modes support specific 7200 Series L2 Switch commands. • User Exec Mode • Privileged Exec Mode • Global Config Mode • Vlan Mode • Interface Config Mode • Line Config Mode The Command Mode table captures the command modes, the prompts visible in that mode and the exit method from that mode. Table 7-1. Command Mode Command Mode Access Method Prompt User Exec Mode Privileged Exec Mode VLAN Mode This is the first level of access. Perform basic tasks and list system information. From the User Exec Mode, enter the enable command. From the Privileged User Exec mode, enter the vlan database command. Switch> Switch# Switch (Vlan) # Exit or Access Next Mode Enter Logout command To exit this mode, enter exit or press Ctrl-Z. To exit to the Privileged Exec mode, enter the exit command, or press Ctrl-Z to switch to user exec mode. Mode-based CLI 7-1 202-10009-01_060204