Netgear MA111v2 MA111v2 User Manual - Page 20
Observing Location and Range Guidelines, Two Basic Operating Modes
View all Netgear MA111v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
User Manual for the NETGEAR 11 Mbps Wireless USB Adapter MA111 Observing Location and Range Guidelines Computers can connect over wireless networks indoors at a range which vary significantly based on the physical location of the computer with the NETGEAR 11 Mbps Wireless USB Adapter MA111. For best results, avoid potential sources of interference, such as: • Large metal surfaces • Microwaves • 2.4 GHz Cordless phones In general, wireless devices can communicate through walls. However, if the walls are constructed with concrete, or have metal, or metal mesh, the effective range will decrease if such materials are between the devices. Two Basic Operating Modes The MA111 Wireless USB Adapter can operate in the following two basic modes: • Infrastructure Mode: An 802.11 networking framework in which devices and computers communicate with each other by first going through an access point (AP). For example, this mode is used when computers in a house connect to an Access Point that is attached to a router which lets multiple computers share a single Cable or DSL broadband Internet connection. • Ad-Hoc Mode: An 802.11 networking framework in which devices or computers communicate directly with each other, without the use of an AP. For example, Ad-Hoc Mode is used when two Windows computers are configured with file and print sharing enabled and you want to exchange files directly between them. Both of these configuration options are available with the MA111 Wireless USB Adapter. Infrastructure configuration procedures for basic network connectivity are covered below. Advanced infrastructure configuration procedures and ad-hoc configuration are covered in Chapter 4, "Configuration" of this manual. 3-2 Basic Setup 202-10032-01