Netgear MCA1001v1 MCA1001 User Guide - Page 20
Using with a DSL Modem
View all Netgear MCA1001v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Coax-Ethernet Adapter MCA1001 User Manual Using with a DSL Modem Note: If you plan to use a splitter on your incoming cable signal, NETGEAR recommends you use a high quality splitter to lessen the chance of digital video or data loss. Also, make sure all coax connections are finger tight to ensure there is no signal loss. Follow the steps in this section to use your Coax-Ethernet Adapter with a DSL modem. After you have completed these steps, your network will resemble this illustration: 1. Coax IN 2. Coax OUT 3. Ethernet cable 4. Telephone cable DSL modem Internet Router Cable TV Laptop PC MCA1001 Figure 2-7 To install a Coax-Ethernet Adapter with a DSL modem: Note: It is not necessary to disconnect your DSL modem from its power, the Internet, or other connections within your network, such as your router. 2-6 Using Your Coax-Ethernet Adapter in DSL, Cable Modem, and Multimedia Settings v1.0, December 2008