Netgear MCA1001v1 MCA1001 User Guide - Page 34
Viewing Statistics, Config/Normal button. Also
View all Netgear MCA1001v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Coax-Ethernet Adapter MCA1001 User Manual The update process typically takes 2 to 3 minutes. Warning: When uploading firmware to the Coax-Ethernet Adapter, do not interrupt the update by pressing the coax-ethernet adapter's Mode Config/Normal button. Also, do not remove power or disconnect either your computer or coax-ethernet adapter. If the update is interrupted, it could corrupt the firmware. 9. If a failure message appears, repeat the update steps. When the update is complete, a success confirmation appears. Your updated firmware version is now displayed in the Firmware Update screen. Viewing Statistics Use statistics to review information about your Coax-Ethernet Adapter network. Note: Any status or settings displayed while in configuration mode will be those updated before the coax-ethernet adapter was taken out of normal mode. 3-8 Managing Your MCA1001 Coax-Ethernet Adapter Network v1.0, December 2008