Netgear R8000 User Manual - Page 116
Use the Router as a Wireless Access Point, To set up the router as an AP, admin, password - ap mode
View all Netgear R8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Nighthawk X6 AC3200 Tri-Band WiFi Router Use the Router as a Wireless Access Point You can set up the router to run as an access point (AP) on the same local network as another router. To set up the router as an AP: 1. Use an Ethernet cable to connect the Internet port of this router to a LAN port in the other router. Cable this port to a LAN port on another router 2. Launch an Internet browser from a computer or wireless device that is connected to the network. 3. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 4. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 5. Select ADVANCED > Advanced Setup > Wireless AP. 6. Select the Enable AP Mode check box. Network Settings 116