Netgear R8000 User Manual - Page 149
Edit a Port Forwarding Service, ADVANCED > Advanced Setup > Port Forwarding/Port Triggering
View all Netgear R8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Nighthawk X6 AC3200 Tri-Band WiFi Router If the application uses a single port, enter the same port number in the External Ending Port field. If the application uses a range of ports, enter the ending port number of the range in the External Ending Port field. 11. Specify the internal ports by one of these methods: • Leave the Use the same port range for Internal port check box selected. • Type the port numbers in the Internal Starting Port and Internal Ending Port fields. 12. In the Internal IP address field, type the IP addressor select the radio button for an attached device listed in the table. 13. Click the Apply button. The service is now in the list on the Port Forwarding/Port Triggering screen. Edit a Port Forwarding Service To edit a port forwarding entry: 1. Launch an Internet browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering. The Port Forwarding/Port Triggering screen displays. 5. Leave the Port Forwarding radio button selected as the service type. 6. In the table, select the radio button next to the service name. 7. Click the Edit Service button. The Ports - Custom Services screen displays. 8. Change the settings as needed: 9. Click the Apply button. Your changes are saved. Specify Internet Port Settings 149